Dimensions
 Length: 156 cm (5′ 1½”)
 Width: 151 cm (59¾”)
 Height: 102 cm (40″)
 Net Weight: 311 kg (685 lb)
 Encasement
 Cabinet Style
 Classic
 Finish
 High Polish: Ebony
 Satin: Ebony
 Inside Rim
 Pomelle Sapele Veneer
 Hardware
 Solid brass — polished and lacquered.
 Technical Specifications
 Rim
 Hard Rock Maple inner rim — this is the foundation of the Boston’s tone. Besides providing superior structural integrity to the piano, it enhances tone by being a rock hard foundation for the soundboard. A Maple rim is found only in the finest pianos. Continuous bent rim.  11 outer rim laminations, 17 inner rim laminations. 23 mm (⅞”) outer rim width, 38mm (1½”) inner rim width.
 Braces
 Radiating braces solidify the piano’s structure. Their triangular layout provides more support than parallel designs. This rigid system improves  tuning stability and soundboard crown retention, and lengthens piano life. 2 braces + 1 treble.
 Pinblock
 Octagrip pinblock made of 11 layers of Hard Rock Maple — glued in different grain angles of 60 degrees — affording the tuning pins greater stability under tension and enabling the piano to stay in tune longer.
 Soundboard
 Close and straight-grained solid (not laminated) Sitka Spruce. Minimum 3 annual growth rings per cm (minimum 8 per inch). Tapered from treble to bass, allowing a greater freedom of movement in the bass, and stiffness in the treble, thereby creating a richer and more lasting tonal response. Tapered from 8 mm to 6 mm. Vibrating area: 1.09 m2 (1,683 in2)
 Ribs
 Made from durable spruce to assure strong and constant support of the strings bearing down on the soundboard. Ribs are fully let-in to the inner rim to support the important soundboard crown and prevent the piano from losing its tone. Number of ribs: 10
 Bridge
 Treble: Vertically laminated (alternating maple and mahogany) with a solid maple cap, curved to fit the crown of the soundboard. Bass: Solid maple mounted to cantilevered base.
 Scale
 Overstrung; combination of agraffe, with front and rear duplex. Rescaled bass and treble for lower tension scale for increased sustain, better tone clarity, and deeper clearer bass. 16,201 kg (35,641 lb.) tension.
 Plate
 Cast from grey iron, bronze-painted and lacquered. Vacuum cast.
 Strings
 Treble: Highest grade steel (in half size increments). Number of sizes: 10. Lowest tenor note: 33. Mapes Bass Strings: Steel core wire wound with solid copper. Made by Mapes in Tennessee, U.S.A. Note 1 speaking length: 114.2 cm (45″).
 Hammers
 Premium wool topfelt over premium wool underfelt. Weight of topfelt: 9.5 kg (20.9 lb). Compression-wired to retain permanent shape. Mahogany moldings. Tapered hornbeam hammershanks. Computer-designed pear-shaped hammers result in superior tone, increased durability and greater voicing ability.
 Action
 Solid maple and hornbeam(all wood, no plastic) for all moving parts. Steinway profile-shaped flanges, extruded aluminum action rails for increased stability and less frequent regulation. Steinway action geometry provides superior touch.
 Keys
 Genuine spruce, individually balanced and weighted. Synthetic ivory and ebony key covers. New synthetic ebony has ebony-like surface texture and appearance that absorbs perspiration from the fingers. The fine synthetic ivory of the white keys has the same properties of friction, porosity, conductivity, and appearance as ivory.
 Pedals
 Heavy solid brass castings. Soft, full sostenuto and damper (sustaining).
 Architecture
 Classic case design. Coved toplid and keyslip, square arm shape with matching square fallboard shape, and wall cornice detail are all classic and beautiful.
 Other
  - Fallboard: Soft fall fallboard.
- Casters: Heavy-duty double-wheel solid brass casters.
- Locks: Fallboard.
- Prop Sticks: Double top prop sticks.
- Bench: artist, adjustable bench (cushion, adjustable height) for all ebony finish pianos.
- Black Felts for Plate, under Fallboard, and around Pedals on Lyre.